Author: Steve
-
JAZZ 600s
Description The newest addition to our JAZZ Cell family of products incorporates a SCARA robot to provide a highly flexible assembly system. The Robot, of industry-standard type, can be used to remove adhesive components from an array of up to 3 PL100 Applicators. It can also be used to transfer substrates between the Applicators for…
-
JAZZ X4
Description The JAZZ X4 is a configurable automation platform. It incorporates a multi-axis (3 or 4 axes) gantry robot. NSI designs and implements specialized tooling attachments as required to interface with your products during assembly operations. An alternative version of the JAZZ X4 replaces the gantry type robot with a SCARA robot can also be…
-
JAZZ 6T Dual
Description The JAZZ 6T‐DUAL is an automation platform configured for use of our PL Series Applicators to apply die‐cut parts to items presented on a servo actuator XY Table. The XY Table strokes are 600mm in both the X and Y axes. The JAZZ 6T‐DUAL can be configured with up to three PL100 Series Applicators…
-
JAZZ 300a
Description The JAZZ300A is a version of our configurable automation platform specifically designed to process components that are supplied in JEDEC Trays. The JAZZ 300A includes a Tray Handler system that provides Input and Output stack capacity for 20 Trays. The JAZZ 300A also features an XY Servo Table with travels of approximately 300 x…
-
FLEX Tube Pro
Description The FLEX Tube Pro is our standard system for automatically feeding Tubes or Vials from bulk storage, labeling the Tubes, and placing the labeled Tubes into a bin for removal by an Operator or to downstream automation for subsequent operations. The FLEX Tube Pro incorporates two other standard products of Nautilus Systems, Inc.: the…
-
PL100-TTP and PL165-TTP
Description The PL100-TTP and PL165-TTP provide an excellent package for precision print and apply applications. Either a PL100 or a PL165 Applicator, based on the width of the label material, can be configured with a Thermal Transfer Printer (TTP) unit to provide an integrated print and apply system. TTP units are available in 4”, 6”,…
-
PL Applicator Accessories
—
by
Series 1 Base The Series 1 Base is a standard automation platform configured specifically for tabletop operation of our standard Applicator products. The Series 1 Base provides a common platform for mounting and alignment of any PL Series Applicator and a Nest/Fixture for locating your product as the adhesive component is applied. It includes a…
-
PL165SS (Side Scan)
Description The PL165 Applicator with Pneumatic Tamp is available with a Side Scan Tamp module. The PL165i-SS or the PL165EPi-SS can be selected for your application. The Side Scan Tamp module provides an additional axis of motion control to allow the Tamp to move on a horizontal plane. This module is typically implemented for applications…
-
PL165EPr
Description The “All-Electric” PL165EPr provides a highly accurate and reliable feed and peel system of virtually any shape of die-cut adhesive component. No pneumatics simplifies setup and maintenance. It provides capacity for components up to 100 x 165mm in size. The EP Package provides maximum accuracy with measured results as good as +/- 0.035mm. The…
-
PL165EPi
Description The PL165EPi provides highly accurate and reliable placement of virtually any shape of die-cut adhesive component. It provides capacity for components up to 100 x 165mm in size. The EP Package provides maximum accuracy with measured results as good as +/- 0.1mm. The EP Package incorporates a ‘closed-loop’ feedback system to monitor travel of…